Firesafe MDF has been tested to EN 13501-1:2007 + A1:2009 and has achieved a B-s1-d0 reaction to fire classification which equates to a Group 1S rating under the New Zealand Building Code.

Colour – Available in Natural & Black Core.

Finish/Appearance – Can be finished with a real timber veneer or factory applied UV satin paint finish.

Enviromentally Friendly – Real Timber veneers are sourced from sustainable and renewable forests and EC, FSC and COC veneers can be provided on request.

Acoustic Perforations – Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create spaces with exceptional acoustic performance.

Pre-Finished – Our panels come prefinished preventing the need for additional onsite trades after installation reducing costs as well as potential onsite issues such as spills, overspray or damage.

Natural Firesafe MDF

Sheet size: 2400 x 1200
Thickness: 12mm, 15mm

Sheet size: 2700 x 1200
Thickness: 12mm

Black Firesafe MDF

Sheet size: 2400 x 1200
Thickness: 12mm, 16mm

Sheet size: 2700 x 1200
Thickness: 12mm

Not all thicknesses are suitable for all applications. Please talk to us for recommendations on your project.

• Wall and ceiling linings
• Acoustic panels especially for schools, hospitals, commercial and public buildings
• Display panels and partition screens.

Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create perfect acoustic performance.

Firesafe MDF is an ideal material to specify for acoustic attenuation as MDF is a good acoustic absorber. Additionally Decoustic 85 felt is bonded to the back of the panels as standard to increase the acoustic properties. Décortech panels have been tested to ISO11654 by University of Auckland in conjunction with Marshall Day Acoustics. Please see our website for acoustic properties in downloadable PDF form for all of our standard perforations. Each perforation pattern is specified as to percentage open area (required by Acoustic Engineers) and a Noise Reduction Coefficient (NRC) value which indicates percentage of noise absorbed.

Firesafe MDF is environmentally friendly and produced under an environmental management system that is certified to ISO 14001 and is FSC certified.

Firesafe Décorply meets a Group 1S in accordance with NZBC Clause 3.4(a) being a type 2 substrate – Décorply has been tested to EN13501-1:2007 as per MBIE guidance 30 March 2015.C/VM2 Amendment 4, Table 2.

Pre-Finished – Firesafe Décorply is a pre-finished panel with a hard-wearing fire-resistant coating that retains the look and beauty of natural wood with the safety of fire retardancy.

Finishes – Choose from a range of custom finishes including Clear, Nude, Blonded, Whitewash, Ivory, Mineral Tint of Brown, Blackwood, Harvest, Walnut, London Grey, First Avenue & Nordic.

Acoustic Perforations – Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create spaces with exceptional acoustic performance.

Sheet size: 2400 x 1200
Thickness: 12mm, 15mm

• Wall and ceiling linings, acoustic panels especially for schools, hospitals, commercial and public buildings, partition screens and display panels.

• Ideal in the most critical applications such as entrance areas and exit corridors especially those used for emergency exits in case of fire.

Firesafe Décorply is an ideal material to specify for acoustic attenuation as plywood is a good acoustic absorber due to the thin wall cellular structure which absorbs the energy from sound waves. When combined with our standard perforations or any custom designs it is possible to achieve perfect acoustics for any space. Additionally, Decoustic 85 felt is bonded to the back of the panels as standard to further increase the acoustic properties.

Décortech panels have been tested to ISO11654 by the University of Auckland in conjunction with Marshall Day Acoustics. Please see our website for specifications in downloadable PDF form for all of our standard perforations. Each perforation pattern is specified as to percentage open area (required by Acoustic Engineers) and a Noise Reduction Coefficient (NRC) value which indicates percentage of noise absorbed.

Décortech sources all Plywood from sustainably managed forests with FSC or PEFC certifications.

As real Firesafe Decorply Plywood is a natural product there will be colour and grain variations (i.e. no two trees are the same). Colour & Grain variations are more evident in larger orders, even when the plywood is sourced from the same batch colour tones can vary. This is unfortunately unavoidable and is part of the beauty of choosing a plywood.

Knots and pips are likely to be present in all plywood. Should you not want this please request that you would like the veneer to be grain matched to minimise inconsistencies. This comes at an additional cost.

Plywood will change in colour over time and initial variations will smooth out with exposure to UV and sunlight. Generally, in 3-6 months most significant variations will even out. Please be prepared to wait this time for the plyw to come into their own.

Melamine may be a suitable alternative should no colour or grain variation be desired.

Colour – Available in Natural & Black & Grey MDF Core.

Finish/Appearance – Can be finished with a real timber veneer or factory applied UV satin paint finish.

Acoustic Perforations – Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create spaces with exceptional acoustic performance.

Pre-Finished: Our panels come prefinished preventing the need for additional onsite trades after installation reducing costs as well as potential onsite issues such as spills, overspray or damage.

Black MR MDF

Sheet size 2400x1200
Thickness: 12mm & 16mm

Grey MR MDF

Sheet size 2400x1200
Thickness: 12mm

Natural MDF

Sheet size: 2400 x 1200
Thickness: 6mm, 9mm 12mm, 16mm, 19mm

Natural MDF

Sheet size: 2700 x 1200
Thickness: 6mm, 9mm 12mm, 16mm, 19mm

Not all thicknesses are suitable for all applications. Please talk to us for recommendations on your project

• Wall and ceiling linings, acoustic panels especially for schools, hospitals, commercial and public buildings, as well as display panels and partition screens.

Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create perfect acoustic performance.

Décortech MDF is an ideal material to specify for acoustic attenuation as MDF is a good acoustic absorber. When combined with our standard perforations or any custom designs it is possible to achieve perfect acoustics for any space. Additionally Decoustic 85 felt is bonded to the back of the panels as standard to increase the acoustic properties. Décortech panels have been tested to ISO11654 by University of Auckland in conjunction with Marshall Day Acoustics. Please see our website for acoustic properties in downloadable PDF form for all of our standard perforations. Each perforation pattern is specified as to percentage open area (required by Acoustic Engineers) and a Noise Reduction Coefficient (NRC) value which indicates percentage of noise absorbed.

Décortech MDF is environmentally friendly and produced under an environmental management system that is certified to ISO 14001 and is FSC certified.

Finish/Appearance – Hoop Pine Interior is generally light coloured and has a fine, even, smooth face with a tight grain surface and no prominent grain or growth rings.

Grading – Hoop Pine is carefully selected for a high quality decorative finish and is ideally suited to high end architectural applications. AC grade is suited to ceiling and wall panels and AA grade is suitable for double-sided applications, such as screens and partitions, especially where the exposed edge is featured.

Acoustic Perforations – Available in a full range of stylish acoustic perforations both standard and fully customised, Hoop Pine Plywood can add natural warmth and elegance to any space.

Pre-Finished – Décortech panels come pre-finished by our Paintline as standard. Hoop Pine is finished with Décortech factory applied UV clear satin to enhance the natural beauty of the timber.

Sheet size: 2400 x 1200
Thickness: 6.5mm, 9mm 12.5mm, 16mm

Sheet size: 2700 x 1200
Thickness: 6.5mm, 9mm 12.5mm, 16mm

• AC Grade – Wall and ceiling lining.

• AA Grade – Double-sided applications, such as screens and partitions.

Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create perfect acoustic performance.

Hoop Pine plywood is an ideal material to specify for acoustic attenuation as plywood is a good acoustic absorber due to the thin wall cellular structure which absorbs the energy from sound waves. Additionally Decoustic 85 felt is bonded to the back of the panels as standard to increase the acoustic properties. Décortech panels have been tested to ISO11654 by the University of Auckland in conjunction with Marshall Day Acoustics. Please see our website for specifications in downloadable PDF form for all of our standard perforations. Each perforation pattern is specified as to percentage open area (required by Acoustic Engineers) and a Noise Reduction Coefficient (NRC) value which indicates percentage of noise absorbed.

Hoop Pine is the perfect environmental choice as it is manufactured to AS/NZS 2270 standard and is 100% sourced from sustainable, plantation grown forests with an E0 formaldehyde rating.

Finish/Appearance – Radiata Plywood is generally a light coloured plywood with a prominent grain. Finished with Décortech factory applied clear satin finish, Décortech Radiata Plywood has a hard wearing, scratch resistant satin finish to give a clear natural look.

Acoustic Perforations – Standard perforations are available including slots, holes and Multigroove as well as any custom designed perforations. Custom size panels, cut-outs for lights, and negative edge details can also be provided. Prestige or Concept drop in ceiling tiles are available in either flat or perforated finish.

Pre-Finished – Radiata Plywood is Radiata plywood finished with a hard wearing clear satin finish.

Sheet size: 2400 x 1200
Thickness: 9mm 12mm, 15mm, 17mm

• Wall and ceiling linings where acoustic properties are required especially for schools, hospitals, commercial and public buildings, partition screens and display panels. It is ideal in areas that have a higher moisture content.

Available in a full range of stylish acoustic perforations both standard and fully customised, Décortech panels can be used to create perfect acoustic performance.

Décortech Radiata plywood is an ideal material to specify for acoustic attenuation as plywood is a good acoustic absorber due to the thin wall cellular structure which absorbs the energy from sound waves. When combined with our standard perforations or any custom designs it is possible to achieve perfect acoustics for any space. Additionally Decoustic 85 felt is bonded to the back of the panels as standard to further increase the acoustic properties. Décortech panels have been tested to ISO11654 by the University of Auckland in conjunction with Marshall Day Acoustics. Please see our website for specifications in downloadable PDF form for all of our standard perforations. Each perforation pattern is specified as to percentage open area (required by Acoustic Engineers) and a Noise Reduction Coefficient (NRC) value which indicates percentage of noise absorbed.

Radiata Plywood is environmentally friendly and is only sourced from sustainably managed forests. FSC certified Radiata plywood can be provided on request.